Quality Assurance at Cesar Network

Pre-Production

Technical assessment

Before the production stage begins, our engineering team performs a technical assessment of your parts design. This includes an assessment on important factors such as material, surface finish, structure, process, and other details of your 3D and 2D drawings.

Material verification

On our customer’s request, we provide a certification of the material we used for making your parts. The report comes from the raw material manufacturer and usually includes material heat number, material grade, material dimensions, mechanical properties, chemical analysis, etc.

In-Production

On-site inspection system

In precision machining, materials being worked on must be always at the right position. With an on-site inspection system, positions are examined automatically, and adjustments are made accordingly. Using an on-site inspection system further helps avoid issues at the early stage, saving cost and time.

In-process quality control

At RapidDirect, we strictly obey the ISO9001:2015 requirements. The quality control staff conducts routine inspections for all parts that are being produced every 2 hours. This further prevents risks from happening.

Final-Production

Full-dimensional inspection report

For all orders, we provide full dimensional inspection reports on request. This report will include the following: quantity of parts, critical dimensions, threads and tolerances, thicknesses and depths, part appearance, etc

Packaging

Ensuring that the parts we manufacture are of the highest quality is important. We know about the unpredictability of logistics. Therefore, we make sure we lower the risk to the parts during our packaging process. Four layers of protection: 1. wrapping paper 2. EPE 3. foam 4. paper/wooden box are applied during the packaging process, ensuring that we deliver the most high-quality and beautiful parts to you.